LCD1210SD – 12.1″ Touch Sensitive Display (Sunlight readable) LCD1210SD - 12.1" Touch Sensitive Display (Sunlight readable)

LCD1210SD – 12.1″ Touch Sensitive Display (Sunlight readable)


The LCD1210SD is a 12.1″ metal-encased, LED-backlit, transflective touchscreen with an anti-glare surface which can be viewed even under direct sunlight.  The display is suitable for any PC with a VGA or DVI video output, and can also display footage from up to 3 analogue cameras via RCA inputs.  A basic mounting stand is included, but the LCD1210SD’s VESA mounting holes allow it to be used with a wide range of other mounting solutions – such as RAM Mount brackets for installation at various locations within the vehicle cab.

The touchscreen is supplied with a 2.5m all-in-one cable, which supplies all necessary feeds except DVI to the touchscreen via a single cable.  The cable breaks out into industry-standard connectors (VGA, RCA, DC plug, etc.) approximately half-way along its length, and has a male multi-pin connector at the display end.  The display itself has a short cable protruding from the back with a corresponding female multi-pin connector for connection to the all-in-one cable.  The DVI cable (if used) connects directly to the rear of the monitor.

The LCD1210SD switches on automatically when a signal is detected on the VGA input, and automatically switches to its third RCA camera input when a 12V signal is applied to a dedicated input feed line (e.g. indicating that reverse gear is selected).

The LCD1210SD has a high native resolution of 1024 x 768, making it perfect for applications that present lots of detailed information on the screen.

Screen size

12.1″ diagonal

Sunlight readable

Transflective sunlight readable panel with anti-glare surface.

Backlight Technology


Supported Resolution

640 x 480 – 1920 x 1200

Physical Resolution

1024 x 768

Aspect Ratio



1000 cd/m²

Contrast Ratio


Viewing Angle

160° horizontal & vertical

Video Inputs

VGA video input (on all-in-one cable)

DVI input (on rear of display)

3 x composite RCA video inputs on all-in-one cable, one with auto switching for rear-view camera

Touchscreen Interface

USB touchscreen interface

Software and drivers are preinstalled on all our PCs (and also available separately)

Touchscreen Technology

Resistive (can be operated with gloves)

Power input

12V (DC input socket on end of all-in-one cable)

Max power consumption


Auto Power On

Display automatically powers on when a VGA input signal is detected, and powers off when the signal is lost.

Auto Camera Switching

Display automatically switches to 3rd RCA video input whenever 12V is applied to a dedicated signal line on the all-in-one cable.


Built-in stereo speakers (2 x RCA audio inputs on all-in-one cable)

Note – the built-in speaker is relatively low powered, and is not suitable for environments with significant background noise.  For these environments we recommend an amplified communications speaker.


Metal enclosure for added strength and durability

Visible area

246 x 185 mm


303 x 223 x 40 mm

Operating Temperature

-30 to 80 °C


Basic mounting stand supplied

VESA 75 mounting holes

Supplied with

AC power adapter

Touchscreen stylus

IR remote

2.5m all-in-one cable

DVI cable

Cigarette lighter power adapter

Mounting stand