Call us on
+44 (0) 1603 485 153

V200 Series 12V PC

Skip to: Buy Online

  • Above: V200 Series PC (see Image Gallery section below for more images)


The V200 series is a single-fanned mini PC featuring a Celeron J1900 processor which offers good levels of performance with low power requirements.  Up to 8 GB RAM is supported, as well as up to two internal hard drives or SSDs, plus USB 3.0 ports and dual-output graphics (VGA & HDMI).

As standard the V200 series accepts a wide input voltage range of 8-19V DC.  Flexibility is one of the V200's key strengths, with up to three Mini PCIe expansion slots, plus an optional PCI Express x1 slot, providing enormous expansion potential.  This allows us to build the PC to your spec with a large number of built-in features, including Wi-Fi, 4G, GPS, analogue video capture, and additional networking or USB ports.  

To facilitate easy SIM card installation an optional tool-less removal mechanism for the front panel (which covers the SIM slot) is available. 

A range of mounting options - covering wall/panel, VESA and DIN rail - ensures that the PC can be used in a wide range of environments.  Long-term availability allows the V200 series to meet your ongoing requirements, and each PC comes with a 2-year warranty as standard.

Key Info

  • Low cost
  • 8-19V DC input
  • Low power Intel Celeron J1900 processor
  • Up to 8 GB DDR3 RAM
  • Up to two internal hard drives / SSDs
  • Dual independent video outputs (VGA & HDMI)
  • Optional internal 3G/4G with optional tool-less SIM card removal
  • Optional GPS, WLAN, Bluetooth & Video Capture
  • Up to 8 x USB 3.0 ports
  • Up to 3 x Gigabit Ethernet ports
  • Optional parallel or serial ports for legacy applications
  • Wall/panel, VESA & DIN rail mounting options
  • 2-year RTB warranty

Order Online

Fetching shop form...
You may need to enable javascript to order online.

Intel Celeron J1900:

  • Quad core
  • 2.0 GHz (2.4 GHz burst frequency)
  • Bay Trail generation

Up to 8 GB DDR3L 1333 MHz (4 GB as standard)


Up to 2 internal 2.5" slots, each supporting any of the following drives.

Solid State Drive (SSD):

  • 60, 120, 128, 256, 512 GB & 1 TB capacities
  • MLC flash memory
  • For 128GB & above models: Ultra-high performance & excellent endurance

Hard Disk Drive (HDD): 

  • 320, 500 GB & 1 TB capacities
  • 350G operating shock tolerance
  • Solid State Hybrid Drive (SSHD) optional
  • 8-16 MB cache depending on model

1 x Gigabit Ethernet port

Optional PCI Express cards:

  • Additional 2 x Gigabit Ethernet ports (3 in total)
  • Additional 1 x Gigabit Ethernet port (2 in total) & 3 x USB 3.0 ports (5 in total)*

*Due to the V200's PCI Express slot being v1.0a compliant, the shared bandwidth of all ports on the card (USB & LAN) is limited to 2.5 Gbps.  The additional USB 3.0 ports are unable to provide the full power requirements of USB 3.0, so are only suitable for self-powered USB devices.  


HD audio with line-out & line-in external audio ports.


Intel HD Graphics with VGA and HDMI independent outputs.


2 x USB 3.0 ports

2 x USB 2.0 ports

Additional 2 x USB 2.0 ports located behind front panel cover (USB ports are non-functional if 3rd Mini PCIe slot is present)

Optional PCI Express cards:

  • 6 x USB 3.0 ports* (8 in total).  
  • 3 x USB 3.0 ports* (5 in total) & 1 x GbE LAN port (2 in total)

*Additional USB 3.0 ports are unable to provide the full power requirements of USB 3.0, so are only suitable for self-powered USB devices.  Due to the V200's PCI Express slot being v1.0a compliant, the maximum bandwidth of additional ports is limited to 2.5 Gbps (shared across all additional ports on the card) rather than 5 Gbps.


Up to 2 x RS-232 serial ports optional (occupies PCI Express slot)


Optional parallel port (occupies PCI Express slot)

Front Panel Cover

Front panel cover containing power button.  2 x USB 2.0 ports are located behind the front panel cover.  

Optional 3rd Mini PCI Express slot & associated SIM card slot are also located behind the front panel cover.  The 3rd Mini PCI Express slot blocks access to the 2 x USB 2.0 ports, which are therefore disabled.

The front panel cover can be removed in order to access the USB ports or SIM card.  As standard this involves a partial disassembly of the PC which requires both a Phillips and a flat-head screwdriver, and takes around 5-10 minutes for removal and reapplication.  

An optional tool-less front-panel cover removal mechanism is available, which secures the front panel cover using external thumb screws instead of internal clips.  With this option no tools are required to remove the front panel cover and the process takes less than 1 minute.  We strongly recommend the tool-less front panel cover removal option if the front panel cover may need to be removed by users with limited practical experience in working with small computers.


2 x Mini PCI Express slots

Optional 3rd Mini PCI Express slot located behind front panel:

  • USB & UIM signalling only
  • Includes SIM card slot adjacent to Mini PCIe slot
  • Blocks access to 2 x USB 2.0 ports located behind front panel, which are therefore disabled.
  • Model code: R04

Optional 1 x PCI Express x1 v1.0a slot

[See below for available expansion card options]


Optional built-in GPS module:

  • Ublox6 chipset
  • 1 x SMA connector for GPS antenna (supports active & passive antennas, available separately)
  • Occupies 1 x Mini PCIe slot
  • Model code: G5

[See below for 3G / 4G modules that include GPS]

Cellular (3G / 4G)

Optional built-in 3G or 4G (with GPS) module with internal SIM slot:

  • Internal SIM slot.  SIM slot is not externally accessible and requires significant disassembly of the PC in order to gain access.  We strongly advise that SIM cards are installed by In-CarPC during production
  • Occupies 1 x Mini PCIe slot
  • 3G / 4G specifications detailed below

Optional built-in 3G or 4G (with GPS) module with SIM slot located behind front panel:

  • Occupies optional Mini PCIe slot
  • Optional tool-less front panel removal for easy access to SIM card slot
  • SIM card provisioning available
  • 3G / 4G specifications detailed below

3G Module Specifications

  • Supports HSPA/UMTS/EDGE/GPRS/GSM network technologies (3.5G)
  • Supports frequency bands 800-850/900/1900/2100 MHz
  • Voice capable
  • Maximum downlink: 14.4 Mbps (HSPA)
  • Maximum uplink: 5.76 Mbps (HSPA)
  • 2 x SMA connectors for 3G diversity antennas (available separately)
  • GPS receiver supporting Standalone & Assisted GPS (GPS not enabled by default, disables 3G diversity when enabled, supports passive GPS antennas only (available separately))
  • Model code: U01

4G (with GPS) Module Specifications

  • Supports LTE/HSPA+/UMTS/EDGE/GPRS/GSM network technologies (4G with fall back to 3.5G)
  • Supports frequency bands 800/900/1800/2100/2600 MHz (4G) and 850/900/1900/2100 MHz (3G)
  • Maximum downlink: 100 Mbps (21.1 Mbps when falling back to HSPA+)
  • Maximum uplink: 50 Mbps (5.76 Mbps when falling back to HSPA+)
  • GPS & GLONASS receiver supporting Standalone & Assisted Modes
  • 2 x SMA connectors for 3G/4G diversity/MIMO antennas (available separately)
  • 1 x SMA connector for active or passive GPS antenna (available separately)
  • Model code: U06
WLAN & Bluetooth

Optional built-in WLAN (Wi-Fi) & Bluetooth module:

  • 802.11 a/b/g/n/ac
  • 2.4 & 5 GHz operation
  • Up to 867 Mbps (WLAN)
  • Bluetooth v4.0
  • 2 x SMA connectors for concurrent WLAN diversity & Bluetooth antennas (available separately)
  • Occupies 1 x Mini PCIe slot
  • Model code: W10
SMA Connector Locations

GPS, 4G and Wi-Fi options each require one (for GPS) or two (for 4G & Wi-Fi) SMA antenna connectors.

For most configurations all SMA connectors are located on the rear of the PC. 

Occasionally it may be necessary to mount one or more SMA connectors along one side of the PC. An optional right-angled SMA adapter allows connected cables to exit towards the rear of the PC. Please contact us with your desired PC specification for more details. 


Optional single-channel CAN interface (USB signalling):

  • USB signalling
  • Bit rates from 10 kbit/s to 1 Mbit/s
  • CAN 2.0B compliant
  • API supplied
  • Occupies 1 x Mini PCIe slot
  • Model code: P17

Optional single-channel CAN interface (PCIe signalling):

  • PCI Express signalling
  • Bit rates from 5 kbit/s to 1 Mbit/s
  • CAN 2.0B compliant
  • 300V galvanic isolation between CAN-bus and PC
  • CAN monitoring software supplied
  • API supplied comprising DLL, examples and header files for all common programming languages, plus documentation
  • Numerous additional optional software and development tools available, including LabVIEW driver
  • Occupies 1 x Mini PCIe slot
  • Model code: P12

Note - We do not recommend V200 series PCs for in-vehicle applications, as the power supply input voltage range is not wide enough, and the PC is not E-mark certified.  CAN-bus support is provided purely to support lab-based applications.  For vehicle-based applications please choose from our C or CQ family PCs.

Video Capture

Optional 8-channel video capture card:

  • 8-channel video (4-channel video + 4-channel audio available on request)
  • H.264/MPEG4 software compression
  • 240/200 fps (NTSC/PAL) at up to D1 resolution shared across all channels
  • SDK available
  • Occupies 1 x Mini PCIe slot
  • Model code: N7

Optional ExpressCard slot:

  • Supports both 34mm and 54mm cards
  • Slot is externally accessible
  • Occupies PCI Express slot
  • Suitable for both USB and PCIe based ExpressCards 

Optional 2 x eSATA II ports

  • Occupies PCI Express slot
  • Supports hot-plugging
  • Supports NCQ
  • Due to the V200's PCI Express slot being v1.0a compliant, the maximum bandwidth is limited to 2.5 Gbps (shared across both ports) rather than 3.0 Gbps.
Power Supply

Internal wide-range power supply:

  • Input voltage range: 8-19V DC
  • PC power status is controlled via a button on the front panel (i.e. traditional desktop PC behaviour)
  • Input power is supplied via a 2.5 x 5.5 mm DC jack socket (plug available separately)
  • AC power supply with the appropriate plug is available separately

Note that the internal power supply is not suitable for being powered from a vehicle's electrical system, as its input range is not wide enough. V-family PCs are also not E-mark certified, so we cannot recommend them for vehicle applications. Please choose from our C or CQ family PCs for vehicle-based applications. 

Operating System

Microsoft Windows 10 Pro 64-bit

Other operating systems, including Windows Embedded options, are available upon request.


Optional wall-mount bracket

Optional DIN rail bracket

Optional VESA mounting screws to allow the PC to be "hung" horizontally or vertically to the back of a VESA 100 monitor.

Optional mounting bracket that secures the PC to the back of a VESA 75/100 monitor and then wall-mounts the combined PC/monitor assembly.  Supports up to 11.5 Kg, recommended only for 27" displays or smaller.  Not compatible with side-mounted SMA antenna connectors.


Active (single fan)


192 x 210 x 62 mm


1.5 Kg (V240 model with SSD and optional PCI Express card providing 3 x USB 3.0 & 1 x GbE)


Operating Temperature: 0°C to +50°C

Storage Temperature: -20°C to +70°C


Optional Factory Recovery Solution for easy recovery to factory settings using F11 key at start-up:

  • Preinstalled as standard if PC is ordered with OS license, optional otherwise

2 years RTB

Estimated End of Life (EoL) Date

Q1 2019

This is the earliest date at which we expect to stop producing new units of this PC model. However, the warranty for each PC will remain in place regardless of whether the EoL date has passed, and will continue for the duration of the original warranty period.




RoHS Compliant

In-CarPC is a registered member of a WEEE compliance scheme

Image Gallery
Model Numbers

Model numbers for the V200 series follow this format:

V2[CPU code]-[RAM code]-[Drive code]-[Optional model codes]

Commonly ordered values for each section of the model number are as follows:

CPU Code

  • 40 (V240) = Intel Celeron J1900

RAM Code

Amount of RAM in GB

Drive Code

Value in GB of drive capacity with the following suffixes:

  • No suffix = mechanical hard drive
  • E = solid state hybrid drive (SSHD)
  • SMN = MLC-type SSD

Systems with dual internal drives are denoted by X/Y where X = code for primary drive and Y = code for secondary drive.

Optional Model Codes

See Specifications section above for model codes.  Where multiple optional codes are present they are simply listed one after the other without any spacing (e.g. "U06W10" in this section indicates the presence of both 4G (with GPS) and Wi-Fi/Bluetooth modules).  

Related Products