Pico Vehicle PC Specifications

2.5" 5400 RPM drives available in 160, 250, 320 and 500 GB sizes, all with 8 MB cache. Drives can withstand up to 350 G operating shock.

SSD drives available in 8, 16 and 32 GB sizes. All SSD drives that we supply with our computers use SLC type memory, which provides enhanced reliability and performance compared to MLC type SSD drives.

We can also provide higher capacity drives and 7200 RPM drives upon request.

• VGA
• DVI (DVI-D*, independent of VGA)
• 4 x USB2.0
• RJ45 LAN
• 3 x audio
• 3 short power input cables, terminating in automotive bullet connectors

*An active DVI-D to VGA converter is available if two independent VGA outputs are required.

Windows XP Professional (SP3)* or Windows 7 Professional
Other operating systems (including Linux and XP Embedded) available on request

*Windows XP Professional will continue to be available preinstalled on our PCs until 2016.

Internal intelligent automotive power supply:

• PC automatically turns on and off with vehicle ignition
• Input voltage: 6V to 24V
• Idle power consumption <5mA
• High efficiency for extended battery life
• PC will not reboot during engine cranking
• Protection against transients and load dumps
• Reverse polarity protection
• Automatic shutdown with low battery
• Optional remote output for turning on and off an external device, such as an amplifier. By default this output will activate approximately 1 second after the PC turns on, and deactivate before the PC turns off. If this output is used to control an amplifier then no "thump" noise will be heard over the vehicle speakers when the PC turns on and off.
• Configurable shut-down delay. The time between the ignition being turned off and the PC powering down can be changed (configured at order time)
• Hard Power Off. In the event of a software crash during shut down the power will be cut to prevent draining of the vehicle battery.
• Modified PSU settings can be loaded for customers with special requirements - please contact us for more information.

e11 ("e-mark" - fully approved for use in vehicles, click here for more information)

CE