J6 series Vehicle PC

Intel Core 2 Duo Mobile:

     Core 2 Duo P8400 2.26 GHz (Model J6226)

     Core 2 Duo T9400 2.53 GHz (Model J6253)

     Core 2 Duo T9600 2.80 GHz (Model J6280)

160, 250, 320, 500, 640 and 750 GB hard drives.

Hard drive specifications:

• 2.5" form factor
• 350G operating shock tolerance
• 5400 RPM as standard
• 7200 RPM optional
• 7200 RPM hybrid SSD optional
• 8-16 MB cache

SSD drives (MLC & SLC) are available upon request.

ICPC-3 chassis

Optional second internal hard drive

ICPC-4 chassis

Optional second internal hard drive or removable hard drive module (occupies optical drive slot)

6-channel HD audio with 3 x audio ports (line-out, line-in, mic-in) including S/PDIF output connector (Toslink, shared with 3.5mm socket).

Intel GMA 4500MHD graphics with VGA, DVI-D and HDMI outputs. Optional LVDS, S-video & RGB outputs.

Up to 10 x USB2.0 ports (6 as standard)

ICPC-1 chassis

3 x serial ports 

ICPC-3/4 chassis

4 x serial ports

All serial ports are RS-232 as standard. Optional RS-422 & RS-485 ports if specified at order time.

Optional 8-bit digital I/O interface 

PS/2 interface:

Expansion:

All chassis

• 1 x Mini PCI Express slot

ICPC-3 chassis (in addition to "all chassis")

• 1 x low profile PCI slot

ICPC-4 chassis (in addition to "all chassis")

• 2 x full-size PCI slots (use of more than 1 PCI card not supported - 2nd PCI slot for back plate only)

[See below for expansion cards available during build]

Optional internal GPS module

• Ublox5 chipset
• 1 x SMA connector for GPS antenna (supports active & passive antennas, available separately)
• Occupies 1 x Mini PCIe slot

[See below for 3G module which includes GPS]

All chassis

Optional internal 3G / GPS / Wi-Fi module

• Internal SIM card slot.  SIM slot is not externally accessible - we advise customers to provide SIM cards for inclusion during PC build.
• Occupies 1 x Mini PCIe slot
• 3G, GPS & Wi-Fi specifications detailed below

ICPC-3/4 chassis

Optional internal 3G / GPS module with external SIM

• Externally accessible SIM card slot
• Does not occupy any expansion slots
• In ICPC-3 chassis the module may obstruct low profile PCI cards where components on the PCI card protrude by more than approx 7 mm
• 3G & GPS specifications detailed below

3G & GPS Specifications

• Supports HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM network technologies
• Supports world-wide frequency bands 800-850/900/1900/2100 MHz (B1, B2, B5, B6, B8)
• Voice capable
• Maximum downlink 14.4 Mbps (HSDPA)
• Maximum uplink 5.76 Mbps (HSUPA)
• 1 x SMA connector for 3G antenna (available separately)
• GPS receiver supporting Standalone GPS, Assisted GPS and more
• 1 x SMA connector for GPS antenna (supports passive GPS antennas only, available separately)

Wi-Fi Specifications

• 802.11b/g/draft-n
• 2.4 GHz operation
• Up to 150 Mbps
• 2 x SMA connectors for Wi-Fi diversity antennas (available separately)

Optional internal Wi-Fi module

• 802.11 a/b/g/n
• 2.4 & 5.0 GHz operation
• Up to 300 Mbps
• 2 x SMA connectors for Wi-Fi diversity antennas (available separately)
• Occupies 1 x Mini PCIe slot

[See above for 3G module that includes Wi-Fi, and below for Bluetooth module that includes Wi-Fi]

Optional internal Bluetooth & Wi-Fi module

• 802.11 b/g/n
• 2.4 GHz operation
• Up to 150 Mbps (Wi-Fi)
• Bluetooth v3.0 +HS
• 2 x SMA connectors for concurrent Bluetooth & Wi-Fi diversity antennas (available separately)
• Occupies 1 x Mini PCIe slot

ICPC-3/4 chassis

Optional single or dual-channel CAN interface 

• Occupies 1 x PCI slot

[CAN-bus configuration pending e11 certification]

ICPC-3/4 chassis

Optional 8-port or 16-port video capture card

• Max 120 fps shared between all channels
• Occupies 1 x PCI slot

Optional high performance 4-port video capture card

• Occupies 1 x PCI slot

Windows 7 Professional (SP1) 32-bit or 64-bit

Windows XP Professional (SP3) 32-bit*

Other O/S may be available upon request

*available until 2016.

Recommended for applications where the PC will be subjected to unusually high levels of vibration.

All chassis

Optional anti-vibration mounting platform

• suitable for horizontal mounting applications only

ICPC-1/3 chassis

Optional anti-vibration mounting platform

• suitable for horizontal and vertical mounting applications

ICPC-4 chassis

Optional internal slot-loading DVD-RW drive

ICPC-4 chassis

Optional removable hard drive module (occupies optical drive slot)

ICPC-1 chassis
Width: 223* mm
Length: 251 mm
Height: 76 mm

ICPC-3 chassis
Width: 222* mm
Length: 251 mm
Height: 84 mm

ICPC-4 chassis
Width: 232 mm
Length: 359* mm
Height: 78 mm

*Figures indicated include mounting flanges at base (total length occupied by mounting flanges: 26 mm)

Horizontal-only anti-vibration mounting platform adds approx 20 mm to height

Horizontal & vertical anti-vibration mounting platform (ICPC-1/3 chassis only) adds approx 3 mm to height

Internal intelligent automotive power supply:

• PC automatically turns on and off with vehicle ignition
• Supports the use of Standby as well as Shut Down and Hibernate (jumper selectable)
• Compatible with 12V and 24V* vehicles
• Normal input voltage: 7.5V to 30V
• Peak input voltage: 7V to 36V
• Idle power consumption <3mA
• High efficiency for extended battery life
• PC will not reboot during engine cranking
• Protection against transients and load dumps
• Reverse polarity protection
• Automatic shutdown with low battery (jumper configurable)
• Automotive mini blade input fuse (externally accessible)
• Regulated 12V accessory output for powering peripherals (up to 1A)
• Remote output for turning on and off external devices, with 1 second "anti-thump" delay.  The behaviour of this output can be configured at order time.
• Configurable shut-down delay. The time between the ignition being turned off and the PC powering down can be changed using externally accessible jumpers.
• Configurable start-up and shut-down voltages to reflect the fact that battery levels and conditions vary between vehicles
• Wake on LAN compatible. The PC can be woken up for up to 20 minutes at a time without the ignition being turned on.
• Hard Power Off. In the event of a software crash during shut down the power will be cut to prevent draining of the vehicle battery
• Post-boot lock-down. If the ignition is turned off having only just been turned on, a delay will be applied before issuing the shut down command, in order to allow the PC to fully boot before attempting to shut down.
• Ignition input behaviour is configurable. By default the PC will turn on when the ignition input is active, and remain on until the ignition input is no longer active, at which point the PC will shut down. Alternatively a push-button power switch can be installed on the chassis for non-ignition-switched behaviour.
• LED indicates PC status and assists with troubleshooting.
• Externally accessible jumper block for configuring power supply options.
• Reset switch in chassis (recessed)
• 6-pin power input locking connector (break-out cable supplied)
• 3-pin power output locking connector (break-out cable supplied)
• Modified PSU firmware can be loaded for customers with special requirements - please contact us for more information.

e11 ("e-mark" - fully approved for use in vehicles, click here for more information)

CE

RoHS Compliant
In-CarPC Ltd is a registered member of a WEEE compliance scheme